4
REQUIREMENTS FOR THE ENVIRONMENT AND TOWING
VEHICLES
Inspect the area to be treated before using the Power Box Rake.
As described in the technical details, always use the Power Box Rake in combination with a
towing vehicle that is suitable for this job.
Do not use the Power Box Rake in the dark, in heavy rain/storm or on slopes with an angle
larger than 20 degrees.
REQUIREMENTS DURING MAINTENANCE, REPAIR AND
ADJUSTMENTS
Keep a record of the repair activities.
When unskilled people use, maintain or repair the machine, this could result in injuries to
the user and to third parties. This must be avoided!
Use only original BLEC parts for maintenance or repairs because of the safety of the
machine and of the user.
Only authorised technical personnel may carry out repairs to the Power Box Rake.
In case of maintenance, adjusting and repairs, it is necessary to block the Power Box Rake
in order to prevent sinking away, driving off and/or sliding off.
If a hydraulic installation is present, you should always make it pressure-free before
working on this installation.
Used oil/grease is harmful to the environment. Dispose of these substances according to
the regulations that apply in your location.
REQUIREMENTS PRIOR TO AND DURING WORK ACTIVITIES TO
THE MACHINE
Attach the Power Box Rake to the towing vehicle according to the regulations. (Danger of
injuries!)
NEVER use the Power Box Rake in the absence of protective guards and safety stickers.
Check the Power Box Rake for loose bolts, nuts and components before every
operation.
Check whether you have a clear field of vision – both close by and far away – before you
start moving.
All persons who are going to operate the Power Box Rake must be familiar with all the
functions and control elements of the Power Box Rake before starting any work activities.
NEVER crawl under the Power Box Rake. If necessary, tip over the Power Box Rake to
work at the bottom side.
If present, check the hydraulic pipelines regularly and replace these when the hydraulic
pipelines are damaged or appear old. The hoses that are replaced should comply with the
technical requirements of the manufacturer.
