10
5.
If the soil is frozen or very wet, postpone the activities until conditions improve.
6.
Do NOT make sharp curves when the Power Box Rake touches the ground.
6. START/STOP PROCEDURE
The start procedure is VERY important. Follow the described procedure precisely, because
otherwise the Power Box Rake can get damaged.
6.1 STARTING TO CULTIVATE
The Power Box Rake can cultivate soil effectively at a depth between 50-100mm (Figure 6).
1.
Set the required depth using the spindles (1) at the rear of the machine.
2.
Make sure that the rotor frame is perpendicular to the 2-wheel tractor.
3.
You can now start treating the surface.
!! Consult the manual of the 2-wheel tractor for its proper operation !!
Figure 6
Stopping occurs as follows:
1.
Stop the 2-wheel tractor.
2.
Switch off the PTO drive on the 2-wheel tractor.
3.
Adjust the machine using the spindles (1), until the rotor is at approx. 100mm
distance from the subsoil.
