ReDeTec ProtoCycler+, Руководство пользователя

Страница: 5 / 37

Note: If you have a High Temperature model, temperatures may reach as high as 500 °C!
Never extrude PVC or any unknown plastic . The fumes could be lethal! Prot
currently supports PLA, ABS, HDPE*, LDPE*, PA12, PETG, HIPS (*special printing hardware is
required to print HDPE/LDPE).
The device provides the ability to experiment with new materials and colors via the manual
extrusion mode. Please do not attempt to extrude any unknown materials unless you
understand the chemical reaction that occurs when the material is thermally broken down. For
example, PVC releases chlorine gas and under no circumstances should you try to extrude it
with the Prot.
Always ensure proper ventilation when extruding any plastic, from the supported list or
otherwise.
1.2 Prot Layout
Before we dive in any further, let’s learn the basic anatomy and terminology used for the device.
The following images label the key features.
4