REDCAT Lightspeed Скачать руководство пользователя страница 41

Страница: 41 / 76

OUTPUT TO ASSISTIVE LISTENING DEVICE (ALD)

1. Turn the Audio (ALD) Out volume control on

the REDCAT side panel all way the down.

2. Determine the size and type of audio input

jack on the device as many manufacturers’

products differ in connector size and shape.

The Lightspeed LES-370 Personal FM System

requires a 3.5mm to 3.5mm patch cable (part#

MSC3535, not included).

3. Connect a patch cable from the ALD’s

microphone jack or AUX input to the 3.5mm

audio jack labeled “AUDIO OUT” on the side

of the REDCAT.

4. Adjust the volume control on the ALD’s

receiver to maximum output. NOTE: This is to

set the maximum allowable signal from

the REDCAT.

5. With the REDCAT and ALD turned on,

speak into the REDMIKE and slowly adjust

the AUDIO OUT volume control until the

appropriate audio level is attained in the ALD’s

receiver headphones.

Содержание Lightspeed













































































Результаты поиска

Содержание Lightspeed

Отзывы:

Похожие инструкции для Lightspeed

Бренды по названию

Популярные бренды

REDCAT Lightspeed, Руководство пользователя

Результаты поиска

Содержание Lightspeed

Отзывы:

Похожие инструкции для Lightspeed

Бренды по названию

Популярные бренды