7.
Strip approx. 3/8“ – 7/16” off end of each wire
8.
Insert one end of the wire into the previously mounted Strip, following the RED/BLACK
polarities.
9.
Insert other end of the wire into the next Strip to be mounted
10.
Mount the strip in the fixture.
11.
Repeat until all the Stripit Kit components have been installed in the fixture.
12.
Replace the ballast cover, which now covers the RedBird LED driver
13.
Replace the Prismatic or Parabolic lens onto the fixture
14.
Turn main power on – and enjoy the energy savings and high light output of RedBird LED’s
Stripit Kits!
