REDBACK
®
C 8867A & C 8868 16 Channel UHF Wireless Mic System
REDBACK
®
C 8884 2 Channel UHF Wireless Mic System
Page 2
Connect the receiver output to the audio mixer or
amplifier input, using a standard audio cable with
3-pin XLR connectors or 6.35mm phone plugs.
Never use the balanced and unbalanced audio
outputs at the same time as this may cause signal
loss or increased noise.
FIGURE 1: RECEIVER DIAGRAM
1. Power switch of receiver
2. CHA/CHB volume adjustor
3. CHA/CHB RF signal light
4. LED display
5. ANT A/ANT B receiver antenna (Fixed)
6. Power jack
7. Mixed output
8. CHA/CHB XLR output
FIGURE 2: HANDHELD TRANSMITTER
DIAGRAM
1.
Pickup cover
2.
Low voltage indicator
3.
Power switch
4. Compartment
(screw along the clockwise)
5.
Bottom cover
AUDIO MIXER
AMPLIFIER
LOUDSPEAKER
LOUDSPEAKER
INPUTS
OUTPUTS
2CH RECEIVER
AUDIO MIXER
AMPLIFIER
LOUDSPEAKER
LOUDSPEAKER
INPUTS
OUTPUTS
2CH RECEIVER