REDBACK
®
C 8867A & C 8868 16 Channel UHF Wireless Mic System
REDBACK
®
C 8884 2 Channel UHF Wireless Mic System
Entry level two channel fixed frequency UHF wireless microphone system, complete with two handheld trans-
mitter microphones. Perfect for clubs, restaurants, function centres and wedding ceremonies. Voices are repro-
duced faithfully whilst allowing freedom of movement. This UHF Band true diversity wireless microphone kit
includes many special features, including but not limited to:
• Multilevel high and mid frequency narrowband filters.
• Advanced noise detection and control.
• Tone keylinked identity to reduce interference.
• Operating frequencies 520 / 524 MHz
• RF signal presence indicator LEDs for both channels A and B.
• Range of up to 60m in ideal conditions open air.
• 6.35mm unbalanced line mix output.
• 3-pin balanced XLR mic output for both channels A and B.
• LED Screen showing operating parameters for both channels.
• 12V-18V d.c. power supply (included)
• 1/2 19” size case with RF indicators. Rack mounting option not supported.
Note: TWO OR MORE WIRELESS MICROPHONES WHICH TRANSMIT AT THE SAME FREQUENCY CANNOT
BE USED IN THE SAME LOCATION. SEPARATE BY AT LEAST 100 METRES TO PREVENT INTERFERENCE.
*DESIGN AND SPECIFICATIONS SUBJECT TO BE CHANGED WITHOUT NOTICE.
Note: Do not attempt to modify the electronics of this device. Doing so may void the warranty
SAFETY PRECAUTIONS:
• Do not spill liquid on the appliance and do not drop it on a hard surface.
• Do not place the appliance near heat sources such as radiators, stoves, amplifiers, or other electrical
equipment.
• Do not expose it to direct sunlight, extremely dirty or dusty environments, excessive moisture or humidity,
and significant vibration.
• Use good quality batteries, matching brand and model.
• Remove the battery from the transmitter if the appliance will not be used for a long period. Doing so will
avoid any damage that may result from a defective leaking battery.
• Do not throw used batteries into a fire. Be sure to dispose of used batteries in accordance with local waste
disposal rules.
• When disposing the equipment, remove the batteries, separate the case, circuit boards, and cables, and
dispose of all components in accordance with local waste disposal rules.
General Usage Guidelines and Precautions:
• To avoid interference, do not put the receiver too near to metallic objects, and avoid obstructions between,
the transmitter and receiver.
• Move the transmitter around the area where you propose to use the system. If you find any dead spots,
change the receiver position. If that does not work, try to avoid the dead spots.
• Avoid the interference from TV, radio, other wireless appliances and etc.
• Avoid extremely dirty or dusty environments.
• Avoid areas where there is extremely high humidity.
BASIC CONNECTIONS:
Page 1