RedBack Lasers EGL624G, Инструкция по эксплуатации

Страница: 2 / 16

CONTENTS
User Safety 2
Introduction and EGL624G™ Accessories 3
EGL624G™Diagram 4
Operating
Instructions 6
Batteries 6
Power and Tilt 7
Grade Setting 8
Manual Mode & V-W-S 10
Vertical Rotation 11
Laser Receiver LRG715 12
Calibration Self Check & Technical Specifications 13
Care & Maintenance, Trouble Shooting 14
Warranty 16
User Safety
• Laser output sign lies near the output aperture.
• Do not stare directly into laser beam.
• Do not disassemble the instrument or attempt to
perform any internal servicing. Repairs and service
should be performed only authorised service
centres of Redback Lasers.
• This instrument complies with the safety
Classification standards of laser radiation.
2
CAUTION: Class 3R laser <5mW at 522-542nm.
Do NOT stare into laser beam or aim at another person.
Follow relevant Australian Standards
Copyright © CMI LasersTM RedBack lasersTM and Level1LasersTM . All rights reserved CMI Industries Pty Ltd 2010
No artwork or photographs produced by CMI Industries Pty Ltd may be used copied or reproduced without the written consent
from CMI Industries Pty Ltd