10
CXR880
TM
OPERATING INSTRUCTIONS cont.
www.redbacklasers.com.au
Setting Slope/Grades - Rotating Laser
(refer to diagram page 5)
The CXR880
TM
can be used to set grades. In Slope (Grade) Mode you can
set a Grade in either the X and or the Y Axis of up to 8% see the markings
on top of laser for axis alignment. When the laser is in this mode it is no
longer continually self levelling and so the Tilt function does not operate and
any disturbance to the laser will not be indicated to the user. Ideally locate
the laser away from other workers and machinery to avoid any accidental
disturbance to the laser.
•
Turn the laser on, allow to level and begin rotating.
•
On either the control panel of the laser or on the remote control press
the Slope (Grade) Mode button . The Slope and the X LED will
illuminate.
•
Select the axis you wish to grade by again pressing this same button
and the selected X or Y axis LED will light.
•
Move the laser plane on the selected axis up or down using the Slope
Grade Direction buttons .
•
To reset and re-level press and hold the Slope Grade button .
The CXR880
TM
can be
used to set grades on
both the “X” and “Y”
axis simultaneously
Содержание CXR880
Страница 1: ......