6 | Installation
ASSEMBLE BRACKETS TO PANEL
Position and bolt the Solar Bracket in-line with the
drilled holes on the solar panel using the supplied M6
Nyloc nuts, M6 Flat Washers and M6 Phillips bolt.
Solar Panel
Solar Bracket
CAUTION
Leave adequate clearance around the solar panels
to ensure the panels do not become partially shaded
when in-use, and to allow access for maintenance of
the panels and connections.
MOUNT TO
CROSSBARS
Lift solar panel with attached
Solar Brackets in the desired
position on the crossbars and
slide the M8 Channel nuts into
the crossbar in line with the
centre hole on the Solar Bracket.
Using the M8 Flat Washer, M8
Spring Washer and the M8
Bolt supplied, bolt the Solar
Bracket to the Channel nut for a
secure solar panel to crossbar
connection. Apply this fitting to
each Solar Bracket to complete
the installation.
COMPLETED INSTALLATION
Note:
Regularly check the mounting
brackets for loose fasteners to avoid
damage to the solar panel and the
crossbars due to loose connection.
Solar Panel
Bracket
Crossbar
CAUTION
All bolts must have at minimum two
threads past the end of the nut.
