Installation | 5
INSTALLATION
DETERMINE THE MOUNTING POSITION
The Solar Brackets must be bolted and fitted to the solar panel then clamped to the crossbars. Do
not install the Solar Brackets to the crossbars first.
To determine where to bolt the Solar Brackets to the solar panel place the solar panel in the
desired location on the crossbars and mark where each Solar Bracket needs to be positioned
and bolted to the solar panel.
Note:
The distance between the two crossbars must be suitable to support the weight and
size of your solar panel. Incorrect positioning of crossbars may cause damage to your solar
panel during travel.
DRILL HOLES
Remove the brackets and drill the marked
holes on the solar panel, preferably using a
6.5 mm drill bit and stopper depth of 6.5 mm.
Back of solar panel
6.5 mm drill
CAUTION
The Solar Bracket must have both bolts
attached to the solar panel. Any fewer will
result in unsecure and unsafe mounting which
may damage your solar panel during travel.
Holes should be deburred after drilling with a
wire brush or file.
