background image

2 INSTALLATION

2.4 

Active Calibration

When the unit is first powered, Active Calibration must first become confident in 

the vehicle direction of travel. Until this time the LED will flash Blue/Green.

Time

Time

During Calibration:

Once Calibrated:

Active Calibration constantly monitors the vehicle’s direction of travel and allows the 
Tow-Pro™ Elite to ‘learn’ and continuously confirm its mounting orientation. This process 
occurs whilst the vehicle is moving and the brake is applied and will occur with or without 
a trailer connected.
When the Tow-Pro™ Elite is first installed it will begin learning its mounting orientation 
through Active Calibration as soon as you start driving, at this point Proportional Mode is 
selected but not yet fully operational.
Until the Tow-Pro™ Elite has determined its mounting orientation the unit will function as 
if in User-Controlled mode, this is indicated by the LED glowing green with blue flashes. 
As the Tow-Pro™ Elite becomes more confident of its direction of travel the length of the 
Blue flash will increase, to the point that the LED is solid Blue which indicates it is now 
operating completely in Proportional mode.
Under normal driving conditions the Tow-Pro™ Elite will learn its mounting orientation 
within 20 brake applications. Note that the braking must be perceptible (applying the 
brake while stopped will not assist calibration).  
If power is disconnected (for example, if the vehicle battery is changed) calibration 
memory will be lost and the unit will recalibrate itself using active calibration. This is 
similar to a radio losing its clock or preset station memory. 

If no trailer is connected, Active Calibration will occur as normal without any indication 
from the LED. The LED will already be Blue when the trailer is connected. Essentially, 
whether a trailer is connected or not, just drive normally and Active Calibration will ensure 
the Tow-Pro™ Elite learns the correct direction of travel.

9

Содержание EBRH-ACCV2

























Отзывы: