11
5 INSTALLATION
Figure 5:
Standard 12 V Input Setup
START
BATTERY
Fuse*
All ground points must
be connected to chassis
earth.
Fuse*
Note: Power wires must be
suitably sized (refer to Section 5.8)
and must be crimped using an
appropriate crimp tool.
Output Voltage Selection
(Refer to Section 5.3)
RED
BLUE
ORANGE
BLACK
BROWN
GREEN
To Loads
Vehicle Ignition
or to D+**
* Fuse Ratings as per table on Page 4
** For vehicle ignition connection, connect to the ignition switched fuse in either the engine bay or the internal fuse box for the radio.
*** See Section 5.6 (page 9).
12V
INPUT
Optional
LED and
Resistor***
Figure 6:
Standard 24 V Input Setup
START
BATTERY
START
BATTERY
GREEN
Optional
LED and
Resistor***
Fuse*
All ground points must
be connected to chassis
earth.
Fuse*
Note: Power wires must be
suitably sized (refer to Section 5.8)
and must be crimped using an
appropriate crimp tool.
Output Voltage Selection
(Refer to Section 5.3)
RED
BLUE
ORANGE
BLACK
BROWN
24V
INPUT
To Loads
Vehicle Ignition
or to D+**
* Fuse Ratings as per table on Page 4
** For vehicle ignition connection, connect to the ignition switched fuse in either the engine bay or the internal fuse box for the radio.
*** See Section 5.6 (page 9).
Содержание DPS1225
Страница 1: ...In vehicle DC Power Supply DPS1225 DPS1240 DPS2410 DPS2420 ...
Страница 14: ...14 NOTES ...