4
FEATURES AND BENEFITS
1. The Manager30 incorporates six products in one, it’s a DC-DC charger, a 110-volt
charger, a solar charger, a dual battery isolator, a load disconnect controller and a
remote battery monitor. The Manager30 will automatically select between charging
sources, requiring no input from the operator during its operation.
2. The Manager30 has no fan, which makes it SUPER quiet and very reliable.
3. The Manager30 is designed and manufactured in Australia, for Australian conditions,
using the latest electronic and design technologies. It is manufactured with high-
quality components to ISO9001 quality and ISO14001 environmental standards and
backed with REDARC’s quality service and two-year warranty.
4. The Manager30 charging algorithm uses solar whenever possible making the unit
more energy efficient and better for the environment.
5. The Manager30’s DC-DC charging enables optimal charging of house batteries, even
if they have different chemical characteristics from the vehicle battery. The input
voltage can be above, equal to or below the output voltage.
6. State of Charge (SOC) indication means you will always know how fully charged the
battery is and how much longer it will need to achieve full charge. An easy to operate,
high-quality, user friendly graphical display module lets you know what’s going on at
all times.
7. The Manager30 is very reliable and includes reverse polarity protection (without
depending on fuses) and short circuit protection. The unit has undergone stringent
safety & electrical compliance testing.
8. The Manager30’s easily selectable charging profiles make it suitable for charging all
lead-acid battery types and suitably protected LiFePO
4
battery types commonly used
in modern caravans and motorhomes.
9. The Manager30 disconnects automatically from the vehicle battery, so there is always
power to start the car.
10. Sophisticated fault detection monitors the house battery condition during all stages
of charging, keeping you and your caravan/ camper/ RV safe.
11. The Manager30 has a separate battery sensor to monitor battery conditions and
state of charge even while The Manager30 is in standby mode. The battery sensor
monitors current, voltage and temperature of the house batteries.
12. Automatic temperature and voltage drop compensation.
Содержание BMS1230S2-NA
Страница 1: ...Battery Management System BMS1230S2 NA THE MANAGER ...
Страница 37: ...4 REMOTE DRILL TEMPLATE 36 NOTE This template must be scaled at 100 for printing to remain accurate ...
Страница 38: ...37 THIS PAGE INTENTIONALLY LEFT BLANK ...
Страница 39: ...38 Two Year Product Warranty For warranty terms visit www redarcelectronics com ...