background image

 

 

 

 FEATURES 



Compact in size 



Over current and short circuit protection 



High operating temperature range up to 70°C 



Over temperature protection 



Input under voltage shutdown 

  Turn on above 9V 

  Turn off instantly below 8V 

  Turn off after 20 seconds below 9V 



Input over voltage shutdown 

  Turn on below 32V 

  Turn off instantly above 32.4V 

  Turn off after 20 seconds above 32V 



Led indication of output mode 

  LED on in float mode 

  LED flashing (4 flashes per second) in absorption mode 

  LED flashing (20 flashes per second) in boost mode 

 
SPECIFICATION 

DC input voltage range: 

9 ~ 32V for continuous operation 

Absorption voltage: 

14.5V 

Float voltage: 

13.7V 

Boost commencement voltage: 

12.2V 

No load current (Ignition switched on): 

< 100mA 

Standby current (Ignition switched off): 

< 150

μ

A  

Input protection: 

Reverse polarity by external fuse   

 

 

(Fuses required 10A on input, not supplied) 

Output protection: 

Output over-current and short circuit protection. 

 

Reverse polarity by external fuse   

 

 

(Fuses required 7.5A on output, not supplied) 

Maximum continuous output current: 

3.5 ~ 6.5 A (input voltage dependent) 

Connector: Input 

Positive 

Common Negative input  

Output Positive 

Ignition Positive 

Standards: 

AS/NZS CISPR11:2004 (CISPR 11 ED. 4.1) 

 
INSTALLATION 

The battery charger should be mounted as close as practicable to the battery being charged.  To minimise voltage 

drop, ensure all additional wiring, especially from supply, is of adequate thickness. Appropriate sized fuses must be 

used to protect the unit from reverse polarity connections; without said fuses, the unit will be damaged in the event of 

a reverse polarity connection. The ignition connection is supplied to allow the unit to be switched by a low current 
positive source of between 9 and 32V.  For continuous operation, the ignition input can be connected directly to the 

supply input. 

DIMENSIONS & CONNECTIONS 

 
 

 
 
 

 
 
 

 
 

 
 
 

 
 
 

 
 

 
 
 

 
 

TYPICAL APPLICATION 
 

 

If the switch input is not required, then it may be connected directly to the input line.

 

LED INDICATOR

CASE COMMON NEGATIVE

IGNITION / SWITCHED POSITIVE

INPUT POSITIVE
COMMON NEGATIVE

OUTPUT POSITIVE

Отзывы: