REDRAY PLAYER OPERATION GUIDE
COPYRIGHT © 2014 RED.COM, INC
955-0017, REV-D | 23
7. Select
Gateway
and enter your network information.
8. Select
DNS
and enter your network information.
The REDRAY communicates with the router for about 10 seconds to obtain your network IP address. You
cannot select anything on the REDRAY on-screen display during these 10 seconds.
After the REDRAY obtains the IP address, the panel on the right side of the screen closes and the IP ad-
dress displays on the NETWORK screen.
NOTE:
If the REDRAY is connected to a router through an Ethernet cable and a wireless connection, two sets
of IP addresses display on the NETWORK screen.
CONNECT WIRELESSLY
For optimal media download speeds, connect to your network using an Ethernet cable, and not a wireless
connection. However, if you only have access to a wireless network, configure your wireless connection by fol-
lowing the instructions below.
1. Navigate to
SETTINGS
>
NETWORK
.
2. Select an available wireless network.
3. Select
Network Name (SSID)
and choose your network.
4. Select
Authentication Type
and choose the appropriate security setting (a home network typically uses
WPA2-Personal).
5. Select
Wireless Key
and enter your network password.
Wireless Networks