Red Sea REFEER, Руководство по эксплуатации, Страница: 20 / 105

Red Sea REEFER ™ Series
6
3 Assembly
The following information complements the graphic manuals.
The REEFER
™
includes the following main components:
•
Glass aquarium
•
Cabinet (self-assembly)
•
Glass Sump including Bubble trap sponge, 400 micron filter bags and
Float valve for automatic top-up
•
Internal Piping kit with outlet nozzle
•
Top-up reservoir
Detailed instructions for the complete assembly of the REEFER ™ can be
found in the accompanying graphic manuals.
Complete the assembly of the cabinet including the doors as shown in
the graphic assembly manual and place in the final operating position
(see location above).
The top of the cabinet is approximately 86cm/34” from the floor.
The table shows the approximate weights of the different models of the
REEFER
™
aquarium glass.
Approximate total weight of system including water
Model Nano 170 250 350 450
Weight 25kg /
55lb 33kg /
72lb 52kg /
115lb 64kg /
140lb 100kg /
220lb
Ensure that you have the correct number of people to lift the aquarium
according to its weight and size.
Ensure that anyone lifting the aquarium is physically suitable for such an
operation and has been instructed in the correct methods of lifting heavy
objects.
Once the aquarium is correctly aligned with the cabinet, check that the
cabinet has not moved. If necessary readjust the position of the cabinet.
Before placing the glass sump in the cabinet make sure that the cabinet
doors are correctly aligned (see instructions in the cabinet assembly
manual).
Once the sump is in position it will not be possible to make
adjustments to the lower hinge without moving the sump .
With the doors properly aligned, rotate the front section of the push
opener to the correct extension so that the doors will pop open when
pushed.
WARNING : If you are not experienced in the construction of self-
assembly furniture or the installation of aquarium systems,
seek suitably qualified assistance.
WARNING : Read before lifting the glass aquarium onto the cabinet.
NOTE : It is important to assemble the REEFER
™
in the order indicated.
NOTE : The REEFER
™
aquarium system should not be moved when full
of water.