10
• LFO modulation amount (±)
• wavefolding threshold and number of folds
• wave window position and width
• waveshaping function
The LFO modulates the sampling rate (
FREQ) by default, but can be assigned to the filter cutoff (FILTER)
or wet/dry blend (
MIX) using our web editor or MIDI. The destination is stored in presets.
DRIVE
Adjusts the input gain from 0 dB to +40 dB. When the knob is moved, the
PRESET and WAVE LEDs will
temporarily display the signal level.
Adjust the
DRIVE knob so that the
⚠
LED blinks only occasionally to maximize the input range. Reduce it
to make the signal sputter and cut out. Increase it for hard sustain and a more saturated sound.
ENV DEST
The envelope follower can modulate the sampling rate (up or down) or wet/dry blend. You can also as-
sign it to the filter cutoff for autofilter effects, using the web editor or MIDI.
ENV
Envelope modulation amount.
PRESET
Press to cycle between presets or live knob settings (all LEDs off). Hold to save the current settings to
the selected preset slot. The right LED will blink green when the preset is saved.
You can select presets 0-126 using MIDI program change messages. MIDI program 127 selects the cur-
rent knob settings. You can save to any preset using our web editor or MIDI SysEx messages. To save a
preset using a simple MIDI controller, first press the
PRESET button until all of the LEDs are off and then
hold down the
PRESET button and send a program change message.
What the LEDs Mean
Left LED
Right LED
Red
LFO hold
Off
Bypass
Red (blink)
LFO off (AUX)
Blue
On
Green (blink)
LFO on (AUX)
Yellow (blink)
Tap tempo
Green (blink)
Preset saved
