6HBWDOG1
Heartbeat Relay
Connect
.Monitor
.
Control
.
2 Assembly and Instruction
2.1 Panel Assembly
Most Red Lion Controls components snap onto DIN rail strips fastened to a subpanel. The watchdog relay can
snap on the DIN rail vertically by hooking the top of the DIN rail mounting bracket on the top of the DIN rail,
then pressing down (See the mounting diagrams below). The watchdog relay module is approximately 4” high
and 1” wide (refer to the Mechanical Dimensions diagram below).
The screw terminals size is M3 and can support wire sizes of 30 to 12AWG. The recommended torque is 5
IN/LB.
Mechanical Dimensions
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]
