18
"
#
?8F,?
*:#83
HOLD DISPLAY
The shown display is held but all other meter functions
continue as long as activated (maintained action).
"
#
"8F,?
*:#83
HOLD ALL FUNCTIONS
The meter disables processing the input, holds all display
contents, and locks the state of all outputs as long as activated
(maintained action). The serial port continues data transfer.
"
#
:C$(
*:#83
SYNCHRONIZE METER READING
The meter suspends all functions as long as activated
(maintained action). When the user input is released, the
meter synchronizes the restart of the A/D with other
processes or timing events.
"
#
<"6
*:#83
"
#
<"6
>3
STORE BATCH READING IN TOTALIZER
The Input Display value is one time added (batched) to the Totalizer at
transition to activate (momentary action). The Totalizer retains a running sum of
each batch operation until the Totalizer is reset. When this function is selected,
the normal operation of the Totalizer is overridden.
"
#
?8656
*:#83
SELECT TOTALIZER DISPLAY
The Totalizer display is selected as long as activated
(maintained action). When the user input is released, the
Input Display is returned. The
DSP
key overrides the active
user input. The Totalizer continues to function including
associated outputs independent of being displayed.
"
#
#6563
*:#83
"
#
#8656
>3
RESET TOTALIZER
When activated (momentary action),
#&:&6
flashes and the Totalizer resets to
zero. The Totalizer then continues to operate as it is configured. This selection
functions independent of the selected display.
"
#
#656/
*:#83
RESET AND ENABLE TOTALIZER
When activated (momentary action),
#&:&6
flashes and
the Totalizer resets to zero. The Totalizer continues to
operate while active (maintained action). When the user
input is released, the Totalizer stops and holds its value. This
selection functions independent of the selected display.
"
#
&8656
*:#83
ENABLE TOTALIZER
The Totalizer continues to operate as long as activated
(maintained action). When the user input is released, the
Totalizer stops and holds its value. This selection functions
independent of the selected display.
"
#
?8FA
*:#83
SELECT MAXIMUM DISPLAY
The Maximum display is selected as long as activated
(maintained action). When the user input is released, the
Input Display returns. The
DSP
key overrides the active
user input. The Maximum continues to function
independent of being displayed.
"
#
#8FA
>3
RESET MAXIMUM
When activated (momentary action),
#&:&6
flashes and
the Maximum resets to the present Input Display value. The
Maximum function then continues from that value. This
selection functions independent of the selected display.
"
#
#8FA
*:#83
RESET, SELECT, ENABLE MAXIMUM DISPLAY
When activated (momentary action), the Maximum value
is set to the present Input Display value. Maximum continues
from that value while active (maintained action). When the
user input is released, Maximum detection stops and holds its
"
#
?8,5
*:#83
SELECT MINIMUM DISPLAY
The Minimum display is selected as long as activated
(maintained action). When the user input is released, the
Input Display is returned. The
DSP
key overrides the active
user input. The Minimum continues to function
independent of being displayed.
RESET MINIMUM
"
#
#8,5
>3
When activated (momentary action),
#&:&6
flashes and
the Minimum reading is set to the present Input Display
value. The Minimum function then continues from that value.
This selection functions independent of the selected display.
"
#
#8,5
*:#83
RESET, SELECT, ENABLE MINIMUM DISPLAY
When activated (momentary action), the Minimum value
is set to the present Input Display value. Minimum continues
from that value while active (maintained action). When the
user input is released, Minimum detection stops and holds
"
#
#8F,
*:#83
"
#
#8F,
>3
RESET MAXIMUM AND MINIMUM
When activated (momentary action),
#&:&6
flashes and the Maximum and
Minimum readings are set to the present Input Display value. The Maximum and
Minimum function then continues from that value. This selection functions
independent of the selected display.
"
#
?8,&G
*:#83
"
#
?8,&G
>3
CHANGE DISPLAY INTENSITY LEVEL
When activated (momentary action), the display intensity changes to the next
intensity level (of 4). The four levels correspond to Display Intensity Level (
!"
#$%
) settings of 0, 3, 8, and 15. The intensity level, when changed via the User
Input/ Function Key, is not retained at power-down, unless Quick Programming
or Full Programming mode is entered and exited. The meter will power-up at the
last saved intensity level.
its value. This selection functions independent of the selected display. The
DSP
key overrides the active user input display but not the Minimum function.
value. This selection functions independent of the selected display. The
DSP
key
overrides the active user input display but not the Maximum function.
Содержание PAXCDL
Страница 28: ...27 PAX PROGRAMMING QUICK OVERVIEW PAXT O NLY ...
