LIMITED WARRANTY
The Company warrants the products it manufactures against defects in materials and workmanship for a period limited to one year from the
date of shipment, provided the products have been stored, handled, installed, and used under proper conditions. The Company’s liability
under this limited warranty shall extend only to the repair or replacement of a defective product, at The Company’s option. The Company
disclaims all liability for any affirmation, promise or representation with respect to the products.
The customer agrees to hold Red Lion Controls harmless from, defend, and indemnify RLC against damages, claims, and expenses arising
out of subsequent sales of RLC products or products containing components manufactured by RLC and based upon personal injuries, deaths,
property damage, lost profits, and other matters which Buyer, its employees, or sub-contractors are or may be to any extent liable, including
without limitation penalties imposed by the Consumer Product Safety Act (P.L. 92-573) and liability imposed upon any person pursuant to
the Magnuson-Moss Warranty Act (P.L. 93-637), as now in effect or as amended hereafter.
No warranties expressed or implied are created with respect to The Company’s products except those expressly contained herein. The
Customer acknowledges the disclaimers and limitations contained herein and relies on no other warranties or affirmations.
APPLICATION
Cost efficiency measurements of a printing company included the
reduction of bulk stock of the various inks used in their printing processes.
The company currently had various ink flow and level devices with different
current and voltage outputs and wanted to record these measurements into a
control room PC. Several IAMA Universal Signal Conditioning Modules
were the answer. The IAMA’s universal input allowed for easy signal
conditioning of the various output signals to the required PC’s Bus Board 0
to 10 VDC input signal. The factory calibration settings of the IAMA could
be used with the devices in which the flow and level pressure was linear to
the signal. The IAMA could also be scaled utilizing the field calibration
method with the devices where pressure affected the signal slope
specifications. In this case, the IAMA’s re-transmitted 0 to 10 VDC output
was field calibrated, negating the expense and time required to rewrite the
PC’s software parameters. In addition to accepting multiple signal types and
field calibration features, the IAMA also provides the necessary electrical
isolation between the control room PC and the hazards of the printing floor
electrical noise.
Red Lion Controls
20 Willow Springs Circle
York PA 17402
Tel +1 (717) 767-6511
Fax +1 (717) 764-0839
Red Lion Controls Asia
31, Kaki Bukit Road 3 #06-02 TechLink
Singapore 417818
Tel +65 6744-6613
Fax +65 6743-3360
Red Lion Controls BV
Basicweg 11b
NL - 3821 BR Amersfoort
Tel +31 (0) 334 723 225
Fax +31 (0) 334 893 793
