For Sales and Support, Contact Walker EMD • Toll-free: (800) 876-4444 • Tel: (203) 426-7700 • Fax: (203) 426-7800 • www.walkeremd.com
2
SPECIFICATIONS
1.
POWER
: 24 VDC ± 10%
400 mA min. (1 module)
3 Amps max. (16 modules)
Must use Class 2 or SELV rated power supply.
2.
COMMUNICATIONS
:
USB/PG Port
: Adheres to USB specification 1.1. Device only using Type B
connection.
Serial Ports
: Format and Baud Rates for each port are individually software
programmable up to 115,200 baud.
RS232/PG Port
: RS232 port via RJ12
COMMS Ports
: RS422/485 port via RJ45, and RS232 port via RJ12
DH485 TXEN
: Transmit enable; open collector, V
OH
= 15 VDC,
V
OL
= 0.5 V @ 25 mA max.
Note: For additional information on the communications or signal common
and connections to earth ground please see the “Connecting to Earth
Ground” in the section “Installing and Powering the CSMSTRSX.”
Ethernet Port
: 10 BASE-T / 100 BASE-TX
RJ45 jack is wired as a NIC (Network Interface Card).
3.
LEDs
:
STS – Status LED indicates condition of master.
TX/RX – Transmit/Receive LEDs show serial activity.
Ethernet – Link and activity LEDs.
4.
MEMORY
:
On-board User Memory: 4 Mbytes of non-volatile Flash memory.
On-board SDRAM: 2 Mbytes
5.
ENVIRONMENTAL CONDITIONS
:
Operating Temperature Range: 0 to 50°C
Storage Temperature Range: -30 to +70°C
Operating and Storage Humidity: 80% max relative humidity,
non-condensing, from 0 to 50°C
Vibration According to IEC 68-2-6: 5 to 150 Hz, in X, Y, Z direction for 1.5
hours, 2 g’s.
Shock According to IEC 68-2-27: Operational 25 g, 11 msec in 3 directions.
Altitude: Up to 2000 meters
6.
CONSTRUCTION
: Case body is burgundy high impact plastic and
stainless steel. Installation Category I, Pollution Degree 2.
7.
POWER CONNECTION
: Removable wire clamp screw terminal block.
Wire Gage Capacity: 24 AWG to 12 AWG
Torque: 4.45 to 5.34 in/lb (0.5 to 0.6 N-m)
8.
MOUNTING
: Snaps onto standard DIN style top hat (T) profile mounting
rails according to EN50022 -35 x 7.5 and -35 x 15.
9.
CERTIFICATIONS AND COMPLIANCES
:
SAFETY
UL Listed, File #E302106, UL508, CSA 22.2 No. 14-M05
LISTED by Und. Lab. Inc. to U.S. and Canadian safety standards
IEC 61010-1, EN 61010-1: Safety requirements for electrical equipment for
measurement, control, and laboratory use, Part 1.
ELECTROMAGNETIC COMPATIBILITY
Emissions and Immunity to EN 61326: Electrical Equipment for
Measurement, Control and Laboratory use.
Notes:
1. Criterion A: Normal operation within specified limits.
2. This device was designed for installation in an enclosure. To avoid
electrostatic discharge to the unit in environments with static levels above
4 kV precautions should be taken when the device is mounted outside an
enclosure. When working in an enclosure (ex. making adjustments, setting
jumpers etc.) typical anti-static precautions should be observed before
touching the unit.
10.
WEIGHT
: 12.9oz (365.7g)
Immunity to Industrial Locations
:
Electrostatic discharge
EN 61000-4-2
Criterion A
2
4 kV contact discharge
8 kV air discharge
Electromagnetic RF fields
EN 61000-4-3
Criterion A
10 V/m
Fast transients (burst)
EN 61000-4-4
Criterion A
2 kV power
2 kV signal
Surge
EN 61000-4-5
Criterion A
1kV L-L,2 kV L&N-E power
RF conducted interference
EN 61000-4-6
Criterion A
3 V/rms
Emissions:
Emissions
EN 55011
Class A
1
Visit www.redlion.net for a complete list of PID modules, data acquisition modules, communications drivers and cables.
The CSMSTRV2 was designed as a direct replacement for the original CSMSTRSE. This new model provides benefits such
as support via Crimson 2.0 software that allows configuration files to be uploaded. To save programming time, files originally
created in Crimson 1.0 (.cdb files) may be imported into Crimson 2.0.
2
Use this part number to purchase Crimson on CD with a printed Modular Controller Manual, USB cable, and RS-232 cable.
Otherwise, download free of charge from www.redlion.net.
3
Industrial grade two million write cycles.
ORDERING INFORMATION
G3CF512M
G3CF256M
PSDRXXXX
Accessories
Power Supply
G3CF
PSDR
512 MB CompactFlash Card
3
256 MB CompactFlash Card
3
64 MB CompactFlash Card
3
DIN Rail Mounted Power Supply
PART NUMBER
TYPE
MODEL NO.
DESCRIPTION
CSMSTRV2
CSMSTRGT
CSMSTRSX
Master Module
CSMSTR
1
Modular Controller Master, Comms, Ethernet
CSTERM00
CSBASE00
RSRSTP00
CBLUSB00
G3CF064M
CBLxxxxx
SFCRM2MC
CBLPROG0
Software
Communications
Cables (10 feet)
SFCRM2
CBL
Replacement Termination Plug
Replacement Base
Rail Stops (Qty 2)
USB Cable
Communications Cables
1
Crimson 2.0
2
, Modular Controller Manual, and Download Cable
RS232 Programming Cable
Modular Controller with multiple protocol converter, data logger,
web server with Virtual HMI up to QVGA (320 x 240) size and
expansion slot.
Modular Controller with multiple protocol converter, data logger,
web server with Virtual HMI up to VGA (640 x 480) size and
expansion slot with increased SDRAM.
