Classe BS2 v1.0
31
11. ERROR MESSAGE
When you turn on the fixture, it will make a reset at first. The display may show“Err channel is
XX” while there are problems with one or more channels. “XX” stands for channel 1, 2, 3, 4, 5, 6
who has the testing sensor for positioning. For example, when the display shows “Err channel is
Color wheel”, it means there is some error in channel 1. If there are some errors on channel 1,
channel 5, channel 6 at the same time, you may see the error message “Err channel is Color wheel”,
“Err channel is Pan movement”, “Err channel is Tilt movement” flash repeated for 2 times, and then
the fixture will generate a second reset. If the fixture remain error message after performing reset
more than 2 times, only the channels which have errors can not work properly, others can work as
usual. Please contact with dealer or manufacturer for service, self repair is not allowed.
PAN- movement Er
(PAN-yoke movement error) This message will appear after the reset of the fixture if the yoke’s
magnetic-indexing circuit malfunction (sensor failed or magnet missing) or the stepping-motor is defective
(or its driving IC on the main PCB). The PAN-
movement is not located in the default position after the reset.
TILT- movement Er
(TILT-head movement error) This message will appear after the reset of the fixture if the head’s
magnetic-indexing circuit malfunctions (sensor failed or magnet missing) or the stepping-motor is defective
(or its driving IC on the main PCB). The TILT-
movement is not located in the default position after the reset.
Color wheel Er
(Color wheel- error) This message will appear after the reset of the fixture if the magnetic-indexing circuit
malfunction (sensor failed or magnet missing) or the stepping-motor is defective (or its driving IC on the
main PCB). The color wheel is not located in the default position after the reset.
Gobo wheel Er
(Gobo wheel - error) This message will appear after the reset of the fixture if the magnetic-indexing circuit
malfunction (sensor failed or magnet missing) or the stepping-motor is defective (or its driving IC on the
main PCB). The Gobo wheel 1 is not located in the default position after the reset.
Prsim - movement Er
(Prsim -head movement error) This message will appear after the reset of the fixture if the head’s
magnetic-indexing circuit malfunctions (sensor failed or magnet missing) or the stepping-motor is defective
(or its driving IC on the main PCB). The Prsim - movement is not located in the default position after the
reset.
Dimmer - movement Er
(Dimmer -head movement error) This message will appear after the reset of the fixture if the head’s
magnetic-indexing circuit malfunctions (sensor failed or magnet missing) or the stepping-motor is defective
(or its driving IC on the main PCB). The Dimmer - movement is not located in the default position after the
reset.
Frost - movement Er
(Frost -head movement error) This message will appear after the reset of the fixture if the head’s
magnetic-indexing circuit malfunctions (sensor failed or magnet missing) or the stepping-motor is defective
(or its driving IC on the main PCB). The Frost - movement is not located in the default position after the
reset.
Содержание Classe BS 2
Страница 1: ......
