Tank capacity
The eClear SubTwin clearomizer is filled with approximately 1.6
ml of liquid. This allows for about 160 to 220 draws, equivalent to
about 16 to 22 cigarettes.
S-Line Battery with Power Control Display
The S-Line battery’s charge level works like traffic lights: Green =
full, yellow = half-full, red = flat. When the battery is empty, the
status LED flashes red repeatedly and the device switches itself off.
When this happens, change or charge the battery. To charge the
battery, gently screw it into the round opening in the USB charger
in a clockwise direction. Connect the USB cable either directly to
a PC or a 220 volt or 12 volt USB adapter (both sold separately).
USB Charger level indicator
The LED on the charger glows red while charging, and green at the
end of the charging process. As the level of charge rises, the LED
light flashes alternately red and green. When the LED is green, plea
-
se unplug the USB charger from the power source and remove the
battery. Your battery is now ready charged for its first use and it
will not be necessary to recharge it before you start up the device.
Conditioning the device
When using it for the first time, or when the unit has not been in
operation for a long period, it needs to be conditioned in order to
produce the full amount of vapour. Draw on the cigarette around
5 to 10 times, one after another. After a few draws, a significant
amount of vapour should be generated. If this is not the case, repeat
the process. If a newly acquired unit has poor vapour generation
right from the start, please contact your dealer to determine the
fault. In such cases cleaning does not improve the situation.
