To attach the tray
Squeeze the buttons on the bottom of the tray
and slide the tray on to the seat frame. You can
choose from 3 different positions. Fig 3.
To attach the foot plate.
Slot the recesses on the foot plate on to the bar
beneath the seat unit and then pull the bottom of
the foot plate towards the front of the chair until it
locks in place. Fig 4.
Secure the foot plate with the two remaining
screws. The screws fit into the small slots
underneath the foot plate.
Height adjustment
To select a different height, squeeze the buttons
on both sides of the height adjustment sliders
and raise up or drop down to your required
height. Release the buttons making sure that the
numbers showing through the height window is
both the same. Fig 5.
Lie back adjustment
Put your thumb on the top of the seat and your
fingers through the hole in the fabric and
squeeze together. Raise of lower the seat to
your required position. Fig 6.
Tray storage.
You can remove the tray and hang it on the
pegs on the back legs for ease of storage.
Fig 7.
Harness usage and adjustment
To secure your child in the harness, push
the buckle prongs (A) + (B) into the buckle
housing (C) until they snap into position.
Adjust sliders to ensure a snug fit for your
child. Repeat for the other side and also
for the shoulder straps.
IMPORTANT! Always use the harness.
IMPORTANT! Always use the harness.
IMPORTANT! Always use the harness.
IMPORTANT! Always use the harness.
Fig 3.
Fig 4.
Fig 5.
Fig 6.
Underside of tray
Buttons
Buttons
Lie back adjustor
Fig 7.
1. Slot in to recess at an
angle
2. Pull the
bottom of the
foot plate
forward
