Parts List
Seat and frame assembly
Slide the top legs through the seat adjustors
from the top. Make sure the red buttons on the
top of the legs are facing outwards and the
numbers on the legs facing forwards.
Push the bottom legs on to top legs Fig 1a
ensuring the spring clips have come fully
through the holes Fig 1b.
Screw the two seat screws and spacers in to the
small hole below the seat height slots on the
inside of the front legs. Fig 1c.
To open and close the frame.
Squeeze the buttons on both sides of the legs
and slide the back legs outwards. To close the
legs simply reverse this process. Fig 2.
Parts
1. Seat Unit
2. Top right leg
3. Bottom right leg
4. Top left leg
5. Bottom left leg
6. Inset tray and tray
7. Foot rest
8. 2 x seat screws
9. 2 x spacers
10. 2 x foot rest screws
Tools required for assembly
Cross head screwdriver
(Not supplied)
NOTE Carefully remove all parts from the
packaging and lay them out in front of you.
1.
2.
3.
4.
5.
6.
7.
9.
8.
10.
Fig 1a.
Fig 1b.
Fig 1c.
Fig 2.
Buttons
Red numbers
and buttons
facing out
Height adjustors
