Red Hat DEVICE-MAPPER MULTIPATH 5.2, Руководство по настройке и администрированию

Страница: 27 / 44

The DM-Multipath Configuration File
By default, DM-Multipath provides configuration values for the most common uses of
multipathing. In addition, DM-Multipath includes support for the most common storage arrays
that support DM-Multipath. The default configuration values and the supported devices can be
found in the
/usr/share/doc/device-mapper-multipath-0.4.7/multipath.conf.defaults
file.
You can override the default configuration values for DM-Multipath by editing the
/etc/multipath.conf
configuration file. If necessary, you can also add a storage array that is
not supported by default to the configuration file. This chapter provides information on parsing
and modifying the
multipath.conf
file. It contains sections on the following topics:
• Configuration file overview
• Configuration file blacklist
• Configuration file defaults
• Configuration file multipaths
• Configuration file devices
In the multipath configuration file, you need to specify only the sections that you need for your
configuration, or that you wish to change from the default values specified in the
multipath.conf.defaults
file. If there are sections of the file that are not relevant to your
environment or for which you do not need to override the default values, you can leave them
commented out, as they are in the initial file.
The configuration file allows regular expression description syntax.
An annotated version of the configuration file can be found in
/usr/share/doc/device-mapper-multipathd-0.4.7/multipath.conf.annotated
.
1. Configuration File Overview
The multipath configuration file is divided into the following sections:
blacklist
Listing of specific devices that will not be considered for multipath. By default all devices are
blacklisted. Usually the default blacklist section is commented out.
blacklist_exceptions
Listing of multipath candidates that would otherwise be blacklisted according to the
parameters of the blacklist section.
defaults
Chapter 4.
17