Red Hat DEVICE-MAPPER MULTIPATH 5.2 страница 22 Скачать руководство пользователя

Страница: 22 / 44

3. Save the configuration file and exit the editor.

Execute the following commands:

modprobe dm-multipath

service multipathd start

multipath -v2

The

multipath -v2

command prints out multipathed paths that show which devices are

multipathed. If the command does not print anything out, ensure that all SAN connections are

set up properly and the system is multipathed.

For further information on the

multipath

command output, see

Section 1, “Multipath

Command Output”

Execute the following command to ensure sure that the multipath daemon starts on bootup:

chkconfig multipathd on

Since the value of

user_friendly_name

is set to

yes

in the configuration file the multipath

devices will be created as

/dev/mapper/mpathn

. For information on setting the name of the

device to an alias of your choosing, see

Chapter 4, The DM-Multipath Configuration File

2. Ignoring Local Disks when Generating Multipath

Devices

Some machines have local SCSI cards for their internal disks. DM-Multipath is not

recommended for these devices. The following procedure shows how to modify the multipath

configuration file to ignore the local disks when configuring multipath.

1. Determine which disks are the internal disks and mark them as the ones to blacklist.

In this example,

/dev/sda

is the internal disk. Note that as originally configured in the default

multipath configuration file, executing the

multipath -v2

shows the local disk,

/dev/sda

, in

the multipath map.

For further information on the

multipath

command output, see

Section 1, “Multipath

Command Output”

[root@rh4cluster1 ~]# multipath -v2

create: SIBM-ESXSST336732LC____F3ET0EP0Q000072428BX1

[size=33 GB][features="0"][hwhandler="0"]

Chapter 3. Setting Up DM-Multipath

Содержание DEVICE-MAPPER MULTIPATH 5.2













































Результаты поиска

Содержание DEVICE-MAPPER MULTIPATH 5.2

Отзывы:

Похожие инструкции для DEVICE-MAPPER MULTIPATH 5.2

Бренды по названию

Популярные бренды

Red Hat DEVICE-MAPPER MULTIPATH 5.2, Руководство по настройке и администрированию

Результаты поиска

Содержание DEVICE-MAPPER MULTIPATH 5.2

Отзывы:

Похожие инструкции для DEVICE-MAPPER MULTIPATH 5.2

Бренды по названию

Популярные бренды