Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 4.7 Скачать руководство пользователя страница 15

Страница: 15 / 78

• Fencing

• Cluster configuration management

3.1. Cluster Management

Cluster management manages cluster quorum and cluster membership. One of the following

Red Hat Cluster Suite components performs cluster management: CMAN (an abbreviation for

cluster manager) or GULM (Grand Unified Lock Manager). CMAN operates as the cluster

manager if a cluster is configured to use DLM (Distributed Lock Manager) as the lock manager.

GULM operates as the cluster manager if a cluster is configured to use GULM as the lock

manager. The major difference between the two cluster managers is that CMAN is a distributed

cluster manager and GULM is a client-server cluster manager. CMAN runs in each cluster node;

cluster management is distributed across all nodes in the cluster (refer to

Figure 1.2,

“CMAN/DLM Overview”

). GULM runs in nodes designated as GULM server nodes; cluster

management is centralized in the nodes designated as GULM server nodes (refer to

Figure 1.3,

“GULM Overview”

). GULM server nodes manage the cluster through GULM clients in the cluster

nodes. With GULM, cluster management operates in a limited number of nodes: either one,

three, or five nodes configured as GULM servers.

The cluster manager keeps track of cluster quorum by monitoring the count of cluster nodes that

run cluster manager. (In a CMAN cluster, all cluster nodes run cluster manager; in a GULM

cluster only the GULM servers run cluster manager.) If more than half the nodes that run cluster

manager are active, the cluster has quorum. If half the nodes that run cluster manager (or

fewer) are active, the cluster does not have quorum, and all cluster activity is stopped. Cluster

quorum prevents the occurrence of a "split-brain" condition — a condition where two instances

of the same cluster are running. A split-brain condition would allow each cluster instance to

access cluster resources without knowledge of the other cluster instance, resulting in corrupted

cluster integrity.

In a CMAN cluster, quorum is determined by communication of heartbeats among cluster nodes

via Ethernet. Optionally, quorum can be determined by a combination of communicating

heartbeats via Ethernet and through a quorum disk. For quorum via Ethernet, quorum consists

of 50 percent of the node votes plus 1. For quorum via quorum disk, quorum consists of

user-specified conditions.

Note

In a CMAN cluster, by default each node has one quorum vote for establishing

quorum. Optionally, you can configure each node to have more than one vote.

In a GULM cluster, the quorum consists of a majority of nodes designated as GULM servers

according to the number of GULM servers configured:

Cluster Management

Содержание CLUSTER SUITE FOR ENTERPRISE LINUX 4.7















































































Результаты поиска

Содержание CLUSTER SUITE FOR ENTERPRISE LINUX 4.7

Отзывы:

Похожие инструкции для CLUSTER SUITE FOR ENTERPRISE LINUX 4.7

Бренды по названию

Популярные бренды

Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 4.7, Обзор

Результаты поиска

Содержание CLUSTER SUITE FOR ENTERPRISE LINUX 4.7

Отзывы:

Похожие инструкции для CLUSTER SUITE FOR ENTERPRISE LINUX 4.7

Бренды по названию

Популярные бренды