COPYRIGHT © 2014 RED.COM, INC
RED DSMC MEDIA OPERATION GUIDE
955-0047, REV-F | 10
RED MINI-MAG MODULES
RED offers the following RED MINI-MAG modules:
RED MINI-MAG Side SSD Module
: Mounts to any standard aluminum DSMC BRAIN.
Carbon Fiber RED MINI-MAG Side SSD Module
: Mounts to any carbon fiber DSMC BRAIN, and is only available
with a carbon fiber DSMC BRAIN.
Each RED MINI-MAG module attaches to the DSMC so that you can mount a RED MINI-MAG to your camera.
Each RED MINI-MAG module has the same EVF/LCD LEMO connector, user keys, and REC button as the
DSMC 1.8" SSD Side Module.
NOTE:
The two (2) screws under the SSD slot on the standard aluminum side SSD modules secure an internal
bracket that provides structural support. DO NOT loosen these screws. Loosening these screws DOES NOT
provide extra clearance for the SSD.
WARNING:
The red metal heat sink under the SSD slot on the Carbon Fiber RED MINI-MAG Side SSD Module
may get hot during long-term operation.
WARNING:
The RED MINI-MAG modules are NOT HOT SWAPPABLE, meaning you cannot remove or install the
modules while the camera is powered on. Before installing or removing the modules you MUST power down the
camera. Failure to do so may result in damage to the module or DSMC that will not be covered under warranty.
RED MINI-MAG SIDE SSD MODULE INCLUDED COMPONENTS
The item listed in the table below ships with the RED MINI-MAG Side SSD Module.
ITEM
PART NUMBER
RED MINI-MAG Side SSD Module
720-0021
RED MINI-MAG SIDE SSD MODULE CONTROLS
This section describes the controls for all of the RED MINI-MAG modules.
CONTROL
DESCRIPTION
User Key 1
Programmable key
User Key 1 + 2 Press: Eject Media
User Key 2
Programmable key
User Key 1 + 2 Press: Eject Media
REC button
Programmable key
Full Press: Record Toggle
Half Press: AF Start
RED MINI-MAG
Side SSD Module
