COPYRIGHT © 2015 RED.COM, INC
RED 4K BROADCAST MODULE OPERATION GUIDE
955-0072, REV-E | 12
OUTPUT 4K QUAD 3G/HD-SDI
REQUIRED ITEMS
DSMC BRAIN
Adaptor module (either a +1 Adaptor Module or a Module Adaptor)
4K Broadcast Module
Four (4) 3G/HD-SDI cables
Quad 3G/HD-SDI device
SET UP 4K QUAD 3G/HD-SDI
1. Ensure that the BRAIN is off.
2. Install the 4K Broadcast Module on the BRAIN. For more information, go to
.
3. Use four (4) 3G/HD-SDI cables to connect the four (4)
SDI-OUT
ports on the 4K Broadcast Module to the
four (4)
3G/HD-SDI IN
ports on a quad 3G/HD-SDI device.
NOTE:
Be careful to connect each cable from the 4K Broadcast Module to the appropriate connector on the
device. For example, connect SDI-OUT 1 on the 4K Broadcast Module (top left quadrant) to 3G/HD-SDI IN
1 on the device.
4. Turn on the BRAIN.
5. Select the frame rate:
A. Go to
Menu
>
Settings
>
Project
>
Frame Rates
.
B. Select a matching
Sensor Frame Rate
and
Project Time Base
.
