32
Thinning hair
The device has a thinning function. The thinning function can be used
to reduce the volume of hair as only some of the
hair is gathered and cut.
• In order to use the thinning function, slide the
sliding switch for the thinning function (7) on
the front of the device to the left.
Cutting precise contours (e.g. sideburns or neck hair)
You can also use the device to cut particularly precise contours, such
as sideburns or neck hair.
• If a comb attachment (2) or (3) is attached to the device, pull the
comb attachment (2) or (3) upwards off the device.
• Turn the device so that the front side of the device is facing your
head.
• Move the device slowly from the top downwards.
8. Cleaning and maintenance
Cleaning the device
WARNING
• Always pull the mains adapter (15) out of the socket before cleaning
the device. Risk of electric shock!
• Only clean the housing of the device with a soft cloth dampened
with warm water or the cleaning brush (16) supplied.
• Do not clean the device with highly flammable liquids. Risk of fire!
• Do not clean the device in the dishwasher.
• Clean the stainless steel blade (1) after each use to prevent lots
of hair getting jammed inside it, which could otherwise impede
flawless operation.
Cleaning stainless steel blade (1)
and comb attachments (2) or (3)
After use, blow on the comb attachments (2) or (3)
and the stainless steel blade (1) to remove any hair
from them. You can also carefully remove wet hair
with your fingers.
WARNING
When cleaning with your fingers, make sure that
you do not injure yourself on the sharp edges of the
stainless steel blade (1).
To clean the stainless steel blade (1) particularly
thoroughly, you can also rinse it under running
water. To do so, proceed as follows:
1. Remove the stainless steel blade (1) from the
device in an upward direction
2. Hold the stainless steel blade (1) under running water so that the
stream of water runs through the stainless steel blade (1) from the
inside out
0
1
