Installation Instructions
Specification
•
Class I (must be earthed)
•
220-240V
•
24W-80W LED
•
50-176pcs SMD5630 Lextar Chip
•
4100K Colour temperature
•
>80 Ra
•
Up to 8100 lumens output
•
Osram ballast
•
IP66
•
50,000 Hours life expectancy
•
>0.9 Power factor
•
Three years guarantee
•
Polycarbonate base & diffuser
LED Non-Corrosive
Fittings
Installation
Instructions p.1
Red Arrow Trading
Elsworth House, Herries Road South
Sheffield, S6 1QS
T:
0800 195 0006
F:
0870 043 3946
E:
www.redarrowtrading.com
1)
Turn off the switch.
2)
Drill Ø6mm holes according to the next drawings.
This installation must be carried out by a qualified electrician.
Please read these instructions carefully before installation.
Leave a copy for the user/maintenance engineer for future reference.
3)
Insert Ø6mm expansion pipe in the wall, fix the mounting
bracket by M4 screw.
4a)
Firstly, open the clips like picture A.
4b)
Secondly, take off the diffuser like picture B.
4c)
Hold on the gear tray retention clip and take off the gear
tray like picture C.
For models: WFLED224, WFLED224E, WFLED424, WFLED424E,
WFLED448, WFLED448E, WFLED534, WFLED534E, WFLED570, WFLED570E, WFLED680 & WFLED680E
5a)
Loosen the nut of the cable gland, put the cable through
the cable gland.
5b)
Connect the cable on the terminal block as shown below
and tighten the cable gland.
LED Fixing
Length
Fixing Hole
Centre
600mm
330mm
1160mm
770mm
1560mm
1098mm
1860mm
970mm/1460mm
