RecSol RECSPEED-2021P Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 48

RecSol RECSPEED-2021P Скачать руководство пользователя страница 30

The “Choose Destination Location” Panel

Here you are informed of the program's default installation directory. Click the Next button to
accept the default installation location (recommended), or click Browse to specify a different
installation location.

The “Choose Folder” Panel

If you wish to install EnterNet to other than the default installation folder, clicking the Browse
button on the Choose Destination Location panel will present the “Choose Folder” panel.
You can either manually type the path to the desired installation location in the Path window, or
you can navigate to the desired folder in the Directories tree. If the folder where you wish to install
EnterNet does not yet exist, you will need to create it with Windows Explorer before you can select
it here. If you need to create the folder, do so now. Before the newly created folder will appear in
the Choose Folder panel, you must close Choose Folder and click the Browse button on the
“Choose Destination Location” panel again. O nce the desired installation location is reflected in
the Path window, click the OK button to close the Choose Folder panel and resume EnterNet
installation.

NOTE: Installing EnterNet on a network drive, as would occur if the installation location were
selected from the Network button on the Choose Folder panel, is not supported.

«
...
28
29
30
31
32
...
»

Содержание RECSPEED-2021P

















































Отзывы:

Нет отзывов