INTERNAL AND EXTERNAL STROBE
※
For heavy strobes and lights please use optional Grip Trey Assembly and compatible
connector.
※
While in the Housing, the camera's on-board strobe will automatically deploy when the
camera is turned ON, and then close when the camera is turned OFF.
※
Use the External Strobe Connection Adapter to connect external strobe fiber optic cable.
Optional Strobe Mask may also be used with the External Strobe Connection Adapter.
Connecting fiber optic cable for external strobe use:
CAUTION!
Store Strobe Mask and External Strobe Connection Adapter in a secure place so
as not to lose them.
1. Using the External Strobe Connection Adapter, attach the optional Strobe Mask by
screwing the Connection Adapter into the Screw Hole.
2. Insert bare fiber optic end into Fiber Optic Socket.
※
Two (2) screw holes are provided at the bottom of the housing for use in attaching
Seatool/Recsea genuine tray and grip assemblies.
CAUTION! Seatool/Recsea STRONGLY recommends the use of Seatool/Recsea genuine
tray and grip assemblies listed below under OPTIONS. Leakage or damages due to the use
of non-genuine options are NOT covered under warranty.
Target Light
※
The Accessory Shoe on top of the housing can be used for installation of a target light.
Please be mindful of the weight of the light(s) you intend to use. For heavy lights and
strobes please use Seatool/Recsea genuine tray and grip assemblies.
※
Please refrain from using lights attached to the Accessory Shoe as a carrying handle.
CAUTION! Damage is irreparable.
MAINTENANCE
CAUTION!
Allowing saltwater and contaminants to dry on housing can damage functions and
O-Rings possibly causing water leakage. Clean with fresh water only, using a soft, dry cloth
to wipe away water.
※
A complete Housing overhaul is recommended once every year.
1. After use in salt water, wash off salt and other contaminants by soaking empty housing
thoroughly in a bucket of fresh water (lukewarm) for 10 to 20 minutes.
2. Manipulate all buttons and dials several times to flush out salt deposits and other
contaminants.
3. Wipe any water off Housing with a soft dry cloth.
4. Open Back Cover.
4
