PACKAGE CONTENTS
Be sure all items listed here were included with your housing:
・
Housing
・
Diffuser
・
Strobe Mask/External Strobe Connection Mount and Screws x 2
・
Hand Strap
・
Housing Port Cover
・
O-Ring Removal Pick
・
Reserve O-rings (1 Main Body and
・
O-Ring Grease
1 Housing Port)
GETTING TO KNOW YOUR RDH-OMEM1 HOUSING
※
.
Diffuser - For use with external strobes the Diffuser can be covered using the Strobe
Mask-External Strobe Connection Mount and screws provided. If desired, to remove
Diffuser unscrew the screws, place the Strobe Mask-External Strobe Connection Mount
over the Flash Window and attach using screws provided.
CAUTION!
When removing the Diffuser and Mount Screws take care to place them in a
secure place so as not to lose them. When reinstalling the Diffuser take care not to tighten
screws too much as the Diffuser threads are made of resin.
※
ON/OFF Lever - Located on housing back cover. When attaching back cover with camera
installed pull ON/OFF Lever up. Once attached set ON/OFF Lever. Likewise when
removing back cover with camera installed pull ON/OFF Lever up.
※
Ball Joint Socket - For use with optional Ball Joint Base.
※
Zoom/Focus Dial - For use with optional zoom and focus gears. Turn slightly to actuate
when installing camera with lens and zoom or focus gear attached.
※
Lens Port/Lens Release Button - When pressed first unlocks the Lens Port. Once Lens
Port is removed press again to active the lens release button.
※
12-50mm Lens Macro Button Lever - For use with OLYPUS M.ZUIKO Digital 12-50mm
1:3.5-6.3 and RECSEA Lens Port SLP-OM1250-FF and Zoom Gear only.
CAUTION!
Set 12-50mm Lens Macro Button Lever to the up position when installing
camera. Failing to do so will create an obstruction and camera will not seat properly.
2.
