Recordex ST-650U, Инструкция по эксплуатации

Страница: 19 / 29

17
Network Settings(Continued)
Wireless Network Setting
( ) Internal router
Method 1: Easy Setup Wizard
(For example, ) WAN lnterface:5G
Select
Easy Setup Wizard
Select
Wireless ISP
Next
Input the default UserName:
admin
, skip the
default password setting as there is no default
password, then press Login button login.
There are five methods to connect with network,
choose your preferred one.
Recommended to select the
DHCP Client
connection.
Automatically obtain IP information from your ISP.
If all Internet IP information is provided by
your ISP, then choose Static IP.
Automatically obtain IP information from
your ISP. If your ISP doesn’t provide a designated IP
for you, then choose DHCP Client.
Ethernet Point to Protocol. Your ISP will
provide you with Login ID and password. Usually this
option is applicable to DSL service.
Point to Point Tunneling Protocol. Your ISP will
provide you with Login ID and password.
Layer 2 Tunneling Protocol. Your ISP will
provide you with Login ID and password. Usually this
option is applicable to DSL service.
Static IP
:
DHCP Client
:
PPPOE
:
PPTP
:
L2TP
:
Successfully
connected to return .
Select
Site Survey
Select from
5G, 2.4G
.
Confirm
Site Survey
Select your desired WiFi signal.
Connect
Input Password
The wireless networks is
based on the
WAN Interface
.
Next
Password Setting Format
WiFi Password of Internal
Router in the IFP.
(Password should be set at
least 8 characters. )
Finished
Get IP,
Changed setting successfully.