Powering On the Panel
Make Power Connection
The panel has a main power switch
located at the rear underside of the
cabinet.
●
Connect the panel to a grounded
110-120V electrical outlet using the
supplied power cord.
NOTE: It is recommended to use a surge
protector power strip rated for use with
electronics devices.
Turn the Panel On
The panel has two power switches:
●
Hard power switch. The first is the main power switch located next to the AC IN
(power plug). This is located in the back of the panel (see image above). This switch
must be in on position to operate the panel. When this is in the on position the
Power Indicator light will dimly glow red.
●
Soft power switch. The second power switch is located on the front edge of the
cabinet. This is the power button used for day to day operation. This will power the
panel out of standby mode and into operating mode. When the panel is in
operating mode the Power Indicator light will glow blue.
NOTE: If the panel will not power then make sure that the panel is plugged in and that the
hard power switch is in the on position, then press the soft power switch on front of panel.
Version: 17.1.6.0
Page 13
