Recordex iMMCam AFX-120, Инструкция по эксплуатации, Страница: 13 / 15

Recordex iMMCam AFX-120 Instruction Manual Page 13
TROUBLESHOOTING
Problem/Observation Solution
No image is displayed or image is
totally black or totally white.
Ÿ
Check that the unit is plugged in and powered
on. Press the LED button to cycle through the
lighting options to confirm the unit is on.
Ÿ Check that the VGA cable is tightly connected
to the document camera and the projector.
Ÿ
The camera is zoomed too far in and is display-
ing only a blank portion of the document or
object. Zoom out or move object.
USB capture is not working
Ÿ
Make sure the USB cable is plugged into the
camera and the computer.
Ÿ
Use a rear USB Port on your computer. Some
front USB ports do not have adequate band-
width and power to allow for quality image
capture.
Ÿ
Try using the capture software provided with
the camera to rule out any issues with third par-
ty software.
Ÿ Unplug USB cable, restart your computer and
camera. Make connection after computer has
been logged into Windows. (resets USB ports)
Image is out of focus Ÿ Press the AutoFocus button.
Ÿ Press the reset button
Ÿ Try zooming in or out a little (press Tele / Wide)
Ÿ Use the near/far button on the remote to man-
ually tweak the focus.
Refer to the “Quick Setup Guide” for opti-
mum camera head placement. 15-18” above
document
Image is dark or washed out Ÿ Press the Auto White Balance button (AWB)
Ÿ Try changing the lighting
Ÿ Manually change the brightness (BRI+/BRI-)
Ÿ Power off camera and try again.
Image is stuck
Ÿ
Press the Freeze button to resume normal
viewing
Ÿ
Power off the unit. Power on and try again.
VGA pass-through is not working
Ÿ
If using a laptop/notebook make sure to switch
the display settings of the notebook to use an
external monitor.
Ÿ Make sure computer has not gone into sleep
mode.
Video projector is unable to project
image from camera.
Ÿ
Make sure VGA connection is tight.
Ÿ
Try changing the output resolution by pressing
and holding the AUTO button for 3 seconds.