RecorderGear PB500, Руководство пользователя

Страница: 8 / 20

8
NOTE:
Recorded files are saved directly to the SD card
in 5, 10, or 15 minute intervals depending on
your settings.
B. Stop Continuous Video Recording:
1. Press the power button once
2. Light 3 will flash blue twice then enter into
standby mode indicated by a solid blue light on
light 4
5
Motion Detection
Recording Mode
A. Begin Motion Detection Video Recording:
1. Power on the PB500
2. While the PB500 is in standby mode, press and
hold the power button for three seconds
3. Light 3 will flash for approximately 15 seconds
and then shut off
4. Every time motion is detected light 3 will flash
once and the PB500 will begin recording
B. Stop Motion Detection Video Recording:
1. Press the power button once
2. The device enter into standby mode indicated
by a solid blue light on light 4