1
Safety
6 / 30
BAL_PROTECT_RC2_RC3_EN_1V0_BLA_121-006454704
1.3
General hazards
The following section lists hazards that can be caused by the system even when used as intended.
To reduce the risk of malfunction, damage to property or injury to persons and to avoid dangerous
situations, the safety instructions listed here must be observed.
The specific safety instructions in the other sections of this manual must also be observed.
IMPORTANT
The country-specific regulations must be observed and complied with!
WARNING
Serious injuries and major property damage.
Incorrect mounting can lead to serious injuries and/or cause major damage to property.
a) Observe and comply with all important instructions regarding safe assembly.
IMPORTANT
To avoid malfunctions, moving objects such as flags or parts of plants must not be allowed to
enter the detection range of the sensors.
NOTICE
The installation must be inspected during the function and safety check for imbalance and
signs of wear or damage to cables, springs and fastening parts.
The equipment must NOT be used if repair or adjustment work needs to be carried out.
NOTICE
Checking, repairs, service, maintenance and cleaning may only be carried out when the sys-
tem is at a standstill and switched off. Before work can be started, persons must be barred
from the system and the danger area.
CAUTION
Risk of malfunctions, material damage or injury due to improper settings!
a) Improper settings can lead to malfunctions, material damage or personal injury.
ð
Do not disconnect the system from the power supply overnight.
ð
Settings should only be made by personnel qualified to do so.
ð
Do not disassemble, put out of operation or manipulate safety devices.
ð
Have faults rectified by specialist personnel or by personnel qualified to do so.
ð
Have service and maintenance carried out according to locally applicable regulations or accord-
ing to a maintenance contract.
