Record Power DX4000, Оригинальное руководство пользователя, Страница: 10 / 20

10
8. Specifications
RSDE1
Capacity: 45 Litres
Motor: 1kw
Size:
H620 x W530 x D360mm
Weight: 11kg
Filtration: 0.5 micron
Air Flow: 53 litres per second
Voltage:
230V ~ 50Hz
RPM: 12500
Noise Emission: < 85dB (A)
RSDE2 & RSDE2/A
Capacity: 50 litres
Motor: 1kw
Size:
H770 x W530 x D360mm
Weight: 13.5kg
Filtration: 0.5 micron
Air Flow: 53 litres per second
Voltage:
230V ~ 50Hz
RPM: 12500
Noise Emission: < 85dB (A)
DX4000
Capacity: 80 litres
Motor: 2 x 1kw
Size:
H630 x W660 x D490mm
Weight: 20kg
Filtration: 0.5 micron
Air Flow: 106 litres per second
Voltage:
230V ~ 50Hz
RPM: 12500
Noise Emission: < 85dB (A)
DX5000
Capacity: 200 litres
Motor: 2 x 1kw
Size:
H1500 x W660 x D490mm
Weight: 23.5kg
Filtration: 0.5 micron
Air Flow: 106 litres per second
Voltage:
230V ~ 50Hz
RPM: 12500
Noise Emission: < 85dB (A)
9. Maintenance
Emptying the drum
1. Remove the head unit from the drum.
2. Leaving the cloth filter in place (DX4000 & DX5000 only), carefully shake the filter and leave for a few
minutes for the dust inside the drum to settle.
3. Remove the cloth filter from the drum.
4. Empty the drum.
5. The cloth filter can be cleaned if required (see below), and refitted.
6. Replace the head unit.
Replacing filters
The filters should be inspected every time the unit is emptied and particularly if any reduction in
performance is noted.
The cloth filter can be cleaned using a vacuum cleaner, and occasionally washed in warm water.
The paper filters trap fine dust, and to prevent becoming clogged should be renewed regularly
(part no. DX1500E).
The cartridge filters should be cleaned at the same time, and should be renewed annually (part no. DX1500F).
To change the filters:
1. Remove the head unit.
2. The cartridge filter is contained within the paper filter bag, these can be removed by simply pulling
them free.
3. The paper filter bag can be removed from around the cartridge filter and disposed of.
4. The cartridge filter can then be carefully cleaned with a vacuum cleaner, or renewed if required.
5. Place the cartridge filter inside a new paper filter bag and fold the top edges of the
paper filter bag down inside the cartridge, noting not to fold the edges any more than 50mm inside the
cartridge filter.
6. Replace the filters into the machine by pressing them back into position.
7. Replace the head unit.
Renewing motor brushes
The motor carbon brushes should not need replacing for at least 1000 hours. These are contained within
the horizontal housings on top of the motor. To fit new carbon brushes (Fig 9.1), first ensure the machine is
switched off and disconnected from the power supply, and, having removed the machine lid and located the
brush housings, undo the two screws that secure the carbon brushes (Fig 9.2). Remove the wires connecting
the carbon brushes to the motor electrics. Insert a new brush onto each side of the motor housing and screw
into place to secure and re-connect the wires. When replacing motor brushes, take care not to allow dust, oil,
water etc. to get into the motor.
Please Note: Before any type of maintenance is carried out, it is important
that the machine is switched off and disconnected from the power supply.
Fig. 9.2
Fig. 9.1
i
Kg
i
Kg
i
Kg
i
Kg
i
Kg