9
Step 9
1 2 3 4 5 6
The Receiver has just received a motion message from the Sensor and has associ-
ated the Sensor with column 3. Column 3 is now programmed as indicated by the
PROGRAM icon
. The ALARM icon
will remain on for 5 seconds.
Step 10
1 2 3 4 5 6
The user has pressed the MODE button 3 times moving the SELECT icon
to
column 6. You can program column 6 or you can also toggle the buzzer ON and OFF.
To toggle the buzzer, press the LIGHT button twice. An alarm associated with an
incoming motion message will be simulated. The vibrating motor will vibrate, the LED
backlight will flash and the buzzer will sound (if it was off before). Pressing the LIGHT
button twice more will toggle back to the previous state causing a new alarm, so this
feature can be used to determine the buzzer state (on or off). Once you are finished
with the buzzer, press the MODE button twice to return to the MONITOR mode or
once to go to the ERASE mode.