RECKMANN R14 Series, Руководство по эксплуатации

Страница: 8 / 40

8
2.
Safety
2.1
Standards and guidelines
The explosion-proof temperature sensors have been designed according to the currently
applicable rules of engineering and accepted safety standards.
During the design phase, all basic safety requirements, standards and directives were applied. The
safety of the sensors is documented by the EU Declaration of Conformity (

chapter 7 „EU
Declaration of Conformity of Conformity“).
All specifications pertaining to safety relate to the currently valid regulations of the European
Union. Applicable laws and national regulations in other countries must be adhered to.
In addition to the safety instructions in this Manual, general accident prevention and
environmental protection regulations must also be complied with. All requirements of the
operating instructions must be followed without restriction.
2.2
Labels
The temperature sensors documented in our instructions are labelled in accordance with their
model and area of operation (see also Doc 141921).
For operation in mines with potentially explosive atmosphere (methane):
#
I M2 Ex ia I Mb
For operation in the hazardous area of Zone 0, 1 and 2 with gas (gas)
#
II 1G Ex ia llC T1...T6 Ga,
#
II 1/2G Ex ia llC T1...T6 Ga/Gb
#
II 2G Ex ia llC T1...T6 Gb
For operation in the hazardous area of Zone 20, 21 and 22 with dust:
#
II 1D Ex ia lllC T13S°C Da,
#
II 1/2D Ex ia lllC T13S°C Da/Db
#
II 2D Ex ia lllC T13S°C Db