manualshive.com logo in svg

RECK MOTOmed gracile12, Инструкция по эксплуатации

Поделиться
Скачать
RECK MOTOmed gracile12 Скачать руководство пользователя страница 66

66

TROUBLESHOOTING

Please use the generated error code to detect and follow the 
 instructions to fault resolution within the following overview of 
error descriptions. If the error occurs repeatedly, please contact the 
 technical support at the RECK Company or an authorized local partner.

Overview of most important error messages 

The most important error codes are listed below. Using the displayed 
error codes from the display of the device, you will find information 
and solutions for the problem in this chart.
If the displayed error code is not listed and a restart or a short 
 disconnection from the mains does not solve the problem, please 
contact the technical support department at the RECK Company or an 
authorized MOTOmed representative.

page 78 

page 78

Error code

A000140

»overheating«

A000150

»Motor 

blocking«

A000202

»Security 

stop«

MOTOmed reaction

Error message 

appears during the 

training.

Error message 

appears during the 

training.

Error appears after 

pushing the start / 

stop button.

Hints for troubleshooting

Disconnect the mains cable and 

allow for a

 

device cool down of 

at least 15 minutes. Thereafter 

reconnect the device.

Check if the pedals are moving 

freely. Restart the device by 

pushing the red start/stop button 

again.

In case of high muscle tune, you 

can try increasing the motor 

power.

Restart the device by pushing 

the red start/stop button again. 

Alternatively, you can disconnect 

and reconnect by pulling the 

mains cable.

Possible cause

Overheating of 

device due to:

 

-

Blocking of pedal 

crank.

 

-

Continuous 

training at a high 

muscle tone.

 

-

Defect  

temperature 

sensor.

 

-

With activated 

SpasmControl 

feature more 

than 15 spasms 

are detected 

subsequently and 

consecutively.

 

-

If the motor 

is blocking for 

longer than 

60 seconds 

with turned off 

SpasmControl.

The stop button 

was pushed for 3 

seconds or more.

Содержание MOTOmed gracile12











































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды