19
General description
Capacitive i-level+ probe with EasyTeach by wire (ETW) for analogue level measurement. This probe which
has its evaluation electronics integrated in the probes head is based on our patented 3 electrode measuring
principle. The i-Level+ probes are designed for level control in plastic container. This is possible because
the 3rd electrode is integrated in the probe. In this case the container does not belong to the measurement.
Therefore the measuring field is close to the probe surface and the i-Level+ probe is more like a classic
capacitive sensor. The measuring area is defined by means of inactive areas that are placed on its top and
end.
It is not necessary to make a manual pre-selection of the capacity range or of a basic capacity as this is
automatically done by the i-Level+ probe during the initial setup.
With the i-Level+ compact probe with EasyTeach by wire an analogue measurement can be made within the
measuring range with 2 free selectable points „ANALOGUE MIN“ and „ANALOGUE MAX“.
Adjustable
analogue Area
Level MIN and
MAX
Measuring range (M)
Probe rod
BE-connection via
cable connection
Optional holder for
connection head,
material VA or AL
Cable 5 x 0,34 mm²
LED green
BE (function earth)
Power Supply
