9
Attach the front handle to the main housing as illustrated in Fig.7, Make sure the lock
spanner (10) is at the right side before attaching the front handle otherwise the front
handle cannot be aligned with the housing. (Fig.7)
Check to confirm the front handle is firmly secured. If not, retighten the locking bolt (9).
Adjust the front handle to the required position and close the lock spanner (10).
Fig. 7
2. Inserting or Removing Battery pack
Hold battery pack with one hand and insert the battery pack to the chute and slide the
battery pack down as shown in Fig 8; with a
“click” the battery pack will be fitted correctly.
Make sure the Lock / Release button (5) for the battery pack is at the lock position and that
the battery pack is engaged.
Release the battery pack by pressing the Lock / Release button (5) with one hand and pull
out the battery pack with the other hand as shown in Fig 9.
Fig. 8 Fig. 9
Adjustments On This Product
1.
Adjustment on the rear handle. (Fig 10-11)
The rear handle can be rotated in 5 steps from 90º, 45 º, 0 º to -45 º, -90º to get the
desired position. (Fig.10-11):
1. Push the button for rotary handle (3) backwards,
2. Rotate the rear handle into the desired position .(Fig.11 )
3. Release the button and make sure it engages. Then the handle is fixed.
The machine can
‟t be switched on during the adjustment of the rear handle.
Fig. 10
Fig. 11
