REBOTEC /
BA-Nr.: 02.07.135/2021-09-A01
- 7 -
EN
9.5. Adjusting the height and depth
•
To adjust the headrest height, fold up the two lev-
ers (A) and slide the headrest to the appropriate
height
•
The headrest is infinitely adjustable (approx. 120
mm) until the push button (B) engages in the hole
(end position).
•
After adjustment is completed, fold the two levers
(A) all the way down again. By removing the clips
(C), the headrest can be removed for cleaning or
replacement.
9.6 Adjusting the tilt angle
•
The backrest can be continuously tilted backwards
by approx. 37 degrees, and the seat surface can
be adjusted by 12 degrees.
•
Pull the locking lever (A) vertically upwards and
then press down on the backrest (B) to the desired
position.
•
Push the locking lever (C) all the way down again.
Seat position
Tilt position
Maintenance instructions
If operation of the locking lever is too stiff
or too loose, the clamping effect can be
readjusted.
•
Dismantle the cover. Using an Allen key (SW5),
the clamping effect of the lever is increased by
turning to the right and
reduced by turning to the
left. Then press the
cover firmly back on and
lock the armrest into
place.
9.7. Adjusting the headrest inclina-
tion
•
By turning the rotary head (A) you can adjust the
inclination of the headrest.
Attention! Risk of crushing (B) be-
tween headrest and backrest cushion
.
C
down
up
A
A
B
B
B
A
C
D
D
A
C
