Rebel ZAB0121, Руководство пользователя

Страница: 11 / 28

11
EN
HANDLEBAR ASSEMBLY/DISASSEMBLY
1. Keep the handlebar release button pressed and push the handlebar
into the opening at the front of the deck until it locks in place. You will
hear an audible click.
2. To disassemble the handlebar, keep the handlebar release button
pressed (it is now located below the front part of the deck at the
height of the left wheel) and pull the handlebar upwards until it
detaches from the deck.
HANDLEBAR HEIGHT ADJUSTMENT
1. Open the clamp.
2. With one hand holding the handlebar, keep the
handlebar height adjustment button pressed with
the other hand and push the handlebar up or down
until the button locks into the desired slot.
Always
make sure the button locks in one of the slots!
3. Tightly close the clamp.
HOW TO RIDE
1. Grip the grips with your hands, place one foot on the deck and the
other foot on the ground.
2. Pay attention to your surroundings and make sure that your riding
area is clear.
3. Kick backwards with your foot beside the scooter to give you motion.
4. Repeat this kicking action in order to stay in motion.
5. To turn left or right lean your body and the handlebar left or right.
6. To stop or slow down, place your kicking foot on the brake above the
rear wheel or put your kicking foot on the ground.
7. Do not over-steer as this could cause you to fall off the scooter.