
Owner’s manual
12
EN
OPERATION
Paper shredding:
1. Mount the shredder head on the wastebasket in such a way that the CD/DVD/
credit card entry slot is above the dedicated tray. Be careful not to pinch your
fingers between the top edge of the wastebasket and the shredder head.
2. Make sure the Mode switch is in OFF position before connecting the device
to power supply socket.
3. Connect the device to power supply socket.
4. The device has three modes:
• AUTO
(automatic start and stop): Shredding will start automatically once
the paper is inserted into the entry slot. It will stop automatically once the
paper has been successfully shredded.
• REV
(reverse): The cutting head runs in reverse and pushes the paper out
of the cutting head. Use this mode if any jams occur.
• OFF:
Turn off the device. Set to this position when emptying the
wastebasket, before cleaning, transporting or if not in use for a longer
period of time.
5. Set the Mode switch to AUTO position.
6. Make sure the paper is dry, clean and free of any wrinkles. Crumpled paper
may jam the cutting head.
7. Make sure the paper is neatly stacked. Splayed sheets may jam the cutting
head.
8. Insert the paper into the center of the paper entry and release. Shredding
will start automatically.
IMPORTANT! Make sure not to insert more than eight sheets per single
pass Otherwise, the paper may jam in the cutting head!
9. When shredding small paper sizes such as letters or receipts, insert them into
the center of the entry slot.
10. Cutting head will stop once the shredding process is complete.
11. Check the fill level in the wastebasket and CD/DVD/credit card tray regularly.
When it is full, empty it immediately.
CDs, DVDs and credit cards shredding:
1. Insert the CD/DVD/credit card tray into the appropriate place inside the
wastebasket.
2. Make sure the shredder head is mounted properly.
3. Set the Mode switch to AUTO position.
4. Insert a CD, DVD or a credit card into the center of the CD/DVD/credit card
entry slot.
•
Insert credit cards lengthwise into the entry slot.
5. Shredding starts automatically.